Differences

This shows you the differences between two versions of the page.

--- en:verejne:sit:wi-fi:linux [07.09.2019 21:48] – [Ubuntu, NetworkManager] finished the translation Pavel Valach
+++ en:verejne:sit:wi-fi:linux [30.09.2023 11:39] (current) – changed the CA certificate to USERTrust Pavel Valach
@@ Line 1: / Line 1: @@
-FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//
+====== Set up Wi-Fi on Linux – Ubuntu, NetworkManager, wpa_supplicant ======
-====== Set up Wi-Fi on Linux - Ubuntu, NetworkManager, wpa_supplicant ======
 ===== Ubuntu, NetworkManager =====
@@ Line 21: / Line 19: @@
        * **Security**: WPA2-Enterprise
        * **Authentication**: Tunneled TLS
-       * **Anonymous identity**: you may leave the field blank or fill out ''anonymous@sin.cvut.cz''
+       * **Anonymous identity**: ''anonymous@sin.cvut.cz''
        * **Domain**: ''radius.sin.cvut.cz''
-       * **CA certificate**: [[en:verejne:sit:cert|download and save it]] (**DigiCert Assured ID Root CA**, format PEM)
+       * **CA certificate**: either browse to ''/etc/ssl/certs/USERTrust_RSA_Certification_Authority.pem'', or [[en:verejne:sit:cert|download and save it]] (download format PEM)
        * **Inner authentication**: PAP
-       * **Username** and **Password** is the same as your SINIS login. \\ You may also use the SIN email address, which you will find right after logging in to SINIS. \\ {{:en:verejne:sit:wi-fi:ubuntu-nm-profile-sec.png?nolink|}}
+       * **Username**: use your SIN username or SIN email (find it after logging in to [[https://sinis.sin.cvut.cz|SINIS]])
+       * **Password**: the same as for your SINIS login. \\ {{:en:verejne:sit:wi-fi:ubuntu-nm-profile-sec.png?nolink|}}
      * Confirm your settings by pushing the **Save** button.
+<note important>The picture has the certificate wrong! It's for illustration purposes only.</note>
 Now, your connection should be all set for secure Wi-Fi browsing.
@@ Line 32: / Line 33: @@
 ===== wpa_supplicant =====
-WPA Supplicant je program, který se v Linuxu stará o podporu WPA zabezpečení Wi-Fi sítí. NetworkManager interně používá právě wpa_supplicant.
+WPA Supplicant is an utility which enables WPA security support for Wi-Fi in Linux. NetworkManager uses wpa_supplicant internally.
-Pokud chcete používat tuto variantu, níže naleznete ukázku definice sítě Sincoolka. Dále postupujte jako u nastavení eduroamu na stránkách CESNETu: https://www.eduroam.cz/cs/uzivatel/sw/nix/wpa_supplicant
+In case you want to set up a wpa_supplicant profile manually, we have prepared a Sincoolka network definition below.
-Také si [[verejne:sit:cert|stáhněte]] **certifikát CA** (**DigiCert Assured ID Root CA**, formát PEM) a uložte na přístupné místo. Cestu k němu později zadáte do konfiguračního souboru.
+To properly verify that you are using our server, the CA certificate is necessary. It should be already on your system at path ''/etc/ssl/certs/USERTrust_RSA_Certification_Authority.pem'', so this configuration will use that. If you don't have it there, you may [[en:verejne:sit:cert|download it from us]] and save it. You will then enter the path to this file in the wpa_supplicant configuration profile.
-Ukázka konfiguračního souboru pro WPA Supplicant:
 <file wpa_supplicant wpa_supplicant.conf>
 network={
-    ssid="Sincoolka"  # nebo Sincoolka 5G
+    ssid="Sincoolka"  # or Sincoolka 5G
     scan_ssid=1
     key_mgmt=WPA-EAP
     eap=TTLS
-    # cesta ke stazenemu CA certifikatu
+    # path to the downloaded CA certificate
-    ca_cert="/etc/cert/digicert-ca.pem"
+    ca_cert="/etc/ssl/certs/USERTrust_RSA_Certification_Authority.pem"
     domain_match="radius.sin.cvut.cz"
     phase2="auth=PAP"
@@ Line 53: / Line 52: @@
     group=CCMP
-    # Vase uzivatelske udaje
+    # Your credentials
     identity="jiri.novak@sin.cvut.cz"
     anonymous_identity="anonymous@sin.cvut.cz"
-    password="VaseSilneHeslo"
+    password="YourStr0ngPa$$word"
 }
 </file>
+===== iwd =====
+//Contributed by our member Artem Poliakov (poliaart <at> fit.cvut.cz)! Thanks!//
+[[https://iwd.wiki.kernel.org/|iwd]] is a wireless daemon for Linux which aims to utilize features provided by the Linux Kernel to the maximum extent
+possible. It can work in standalone mode or in combination with comprehensive network managers.
+If you want to connect to Wi-Fi using iwd, you need to place file called ''Sincoolka.8021x'' or ''Sincoolka 5G.8021x''
+(depending on which network you'd like to connect) under ''/var/lib/iwd'' directory. The suggested contents can be found below.
+To properly verify that you are using our server, the CA certificate is necessary. It should be already on your system at path ''/etc/ssl/certs/USERTrust_RSA_Certification_Authority.pem'', so this configuration will use that. If you don't have it there, you may [[en:verejne:sit:cert|download it from us]] and save it. You will then enter the path to this file in the wpa_supplicant configuration profile.
+<file iwd Sincoolka.8021x>
+[Security]
+EAP-Method=TTLS
+EAP-Identity=anonymous@sin.cvut.cz
+EAP-TTLS-ServerDomainMask=radius.sin.cvut.cz
+EAP-TTLS-CACert=/etc/ssl/certs/USERTrust_RSA_Certification_Authority.pem
+EAP-TTLS-Phase2-Method=Tunneled-PAP
+EAP-TTLS-Phase2-Identity=your.username@sin.cvut.cz
+EAP-TTLS-Phase2-Password=YourStr0ngPa$$word
+[Settings]
+AutoConnect=true
+</file>