Differences

This shows you the differences between two versions of the page.

--- en:verejne:navody:ipv6 [13.08.2017 18:19] – created valach
+++ en:verejne:sit:ipv6 [24.10.2020 14:35] (current) – [Remove Tunnel adapter Local Area Connections] removed (not necessary anymore) Pavel Valach
@@ Line 1: / Line 1: @@
-====== IPv6 connectivity ======
+====== IPv6 ======
 ===== Setting up IPv6 on Windows =====
-For IPv6 support, Sincoolka network does not require special settings when using Windows Vista and newer. DHCPv6 is used to assign proper addresses, so you should have no issues connecting to the IPv6 websites and hosts.
+When connected via cable or Wi-Fi, registered network adapters will obtain IPv6 connectivity automatically. DHCPv6 is used to obtain an IPv6 address and DNS server address; Router Advertisements for obtaining the default gateway.
-In case of issues, check your network adapter properties. Under loaded protocols, TCP/IPv6 should be enabled (the checkbox should be checked). Also check, in protocol properties, whether automatic address configuration is enabled. Eventually, if nothing else helps, reboot your computer, and then, if the issue is still not resolved, email us at [[admin@sin.cvut.cz]].
+**In case of issues:**
+  * If you have disabled IPv6 through registry, you will need to revert that change to obtain IPv6 connectivity.
+  * Check your network adapter properties. Under loaded protocols, TCP/IPv6 should be enabled (the checkbox should be checked). Also check, in protocol properties, whether automatic address configuration is enabled. Eventually, if nothing else helps, reboot your computer, and then, if the issue is still not resolved, email us at [[admin@sin.cvut.cz]].
 ===== Setting up IPv6 on Linux =====
@@ Line 16: / Line 19: @@
 Your IPv6 address should start with ''2001:718:2:880:'' or ''2001:718:2:8a0:''.
-=====Remove Tunnel adapter Local Area Connections=====
-  - Please, try the following steps:
-    - Click Start, type “devmgmt.msc” in the search bar and press Enter. This would open up the Device manager for you.
-    - Click View and select "Show hidden devices".
-    - Now expand the Network Adapters section and delete all Tunnel adapter Local Area Connections.
-  - Please, try the following steps and see how it works: \\
-    - Click Start, type cmd in the Start Search box, right click the cmd.exe, and then click Run as Administrator.
-    - In the Command Prompt, type ''netsh int isa set state disabled'', and press Enter.
-  - Download the {{verejne:ipv6_tunnel.zip|reg file}} and save to desktop. Double click on the saved file to merge into registry, reboot to take effect. Disabling the isatap will work to remove the Ipconfig reference. However unlike other protocols, you cannot disable IPv6 by disabling the protocol on each of your network interfaces. While that will disable the protocol for the interfaces the loopback and tunnel interfaces will still have it enabled.