Differences

This shows you the differences between two versions of the page.

--- en:verejne:sit:nove-zarizeni [15.01.2019 11:05] – [Connect new device to the network] added SIN email link Pavel Valach
+++ en:verejne:sit:nove-zarizeni [20.11.2022 22:05] (current) – [Instructions] Pavel Valach
@@ Line 5: / Line 5: @@
 First you need to [[en:verejne:sit:sinis|become a member of Club Sincoolka]], and during that you will register your initial device.
-After signing the form, you will be allowed to register more devices. Write the enquiry to administrators at [[admin@sin.cvut.cz]] **from your registered e-mail address or from your [[en:verejne:sit:e-mail|SIN e-mail]]**, or register the device(s) in person, [[https://www.sin.cvut.cz|during the office hours in LAB]].
+After signing the form, you will be allowed to register more devices.
-For each device, we need to know the following:
+===== Instructions =====
-  - the MAC address of the adapter, and whether it's for Wi-Fi or Ethernet. \\ //Note that laptops usually have two MAC addresses: one for the cable socket and one for Wi-Fi.//
-  - the type of the device to be registered (laptop, phone, server etc.)
+Write the enquiry to administrators at [[admin@sin.cvut.cz]] **from your registered e-mail address or from your [[en:verejne:sit:e-mail|SIN e-mail]]**, or register the device(s) in person, [[https://www.sin.cvut.cz|during the office hours in LAB]].
+For each device, write in the email:
+  - the MAC address of the network device,
+  - whether the MAC address is a Wi-Fi address or Ethernet address, \\ //(Note that laptops usually have two MAC addresses: one for the cable socket and one for Wi-Fi.)//
+  - the type of the device to be registered (laptop, phone etc.)
 Administrators will register 1 cable device and up to 3 Wi-Fi devices. Wi-Fi can become quite crowded in the evening, hence the limit. Thanks!
@@ Line 25: / Line 30: @@
 Cannot find the MAC address of your device? Bring it to LAB during the office hours, we'll be happy to help.
 Sometimes it's found on the box, in case of Ethernet adapters it can be printed on the bottom, but most times you can find it in "Settings" - "Wi-Fi" or "About" section.
+===== Turning off random MAC addresses =====
+Newer systems like iPhoneOS or Android generate a random MAC address for each Wi-Fi network. This feature needs to be turned off for the Sincoolka network to work. Find the walkthroughs below.
+{{indexmenu>:en:verejne:sit:mac-random|tsort nsort}}
 ===== Connecting to the network =====
@@ Line 30: / Line 42: @@
 Have you just got your device registered? Wait for 15 minutes, then (re)connect your device to the network.
-To connect your device to the **cable network**, it should be sufficient to plug in the cable into the socket in the wall, and the other end into your computer's socket. Haven't got a cable yet? No worries, we'll give you one in LAB.
+To connect your device to the **cable network**, it should be sufficient to plug in the cable into the socket in the wall, and the other end into your computer's socket. Haven't got a cable yet? No worries, we'll give you one in LAB. (Or we will make one for you. Depends on supplies. :))
-To connect your device to the **Wi-Fi network**, connect to the SSID **Sincoolka (5G)**. Use the e-mail and password that you use when logging into SINIS. [[en:verejne:sit:wi-fi|More info and walkthroughs in the Wi-Fi topic]].
+To connect your device to the **Wi-Fi network**, connect to the SSID **Sincoolka (5G)**. As your username (identity), use SIN username or SIN e-mail (can be found in [[https://sinis.sin.cvut.cz|SINIS]]), and password that you use when logging into SINIS. [[en:verejne:sit:wi-fi|More info and walkthroughs in the Wi-Fi topic]].