How to install the network printer in Windows

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How to install the network printer in Windows – IPP ======

To enable printing on the printer, you need to add it to your Windows. The walkthrough will work for both 64-bit and 32-bit versions of Windows 10 and it should, with small system-dependent changes, also work in older Windows versions.

===== Setup for advanced users =====

<note important>It is necessary to be connected through Club Sincoolka computer network to install our printer. Our printer doesn't work on eduroam.</note>

**Drivers:** \\

64bit: \\
Windows Update download: http://download.windowsupdate.com/msdownload/update/driver/drvs/2011/07/4753_fc148f3df197a4c5cf20bd6a8b337b444037655f.cab \\
Local copy: https://git.sin.cvut.cz/sincoolka/public-printer-installer/raw/branch/master/hp-driver-amd64.cab \\
Checksum – SHA256: 36E4ADBA837C391E70219F64C31E20FC64EF5A0C11BFDA8170540DBECC4EF42F

32bit: \\
Windows Update download: http://download.windowsupdate.com/msdownload/update/driver/drvs/2011/07/4754_10c77b0c78335f0fa4334ea932d5c0b4a653880a.cab \\
Local copy: https://git.sin.cvut.cz/sincoolka/public-printer-installer/raw/branch/master/hp-driver-x86.cab \\
Checksum – SHA256: 864EE4D1E3C4914BF37535D15952A7981186048604F7311D005A156F61061599

**Extract the cab file and install the drivers (run Command Prompt as Administrator):**
<code>
mkdir drv
expand.exe hp-driver-amd64.cab -F:* drv
pnputil.exe -a drv\prnhp002.inf
</code>

Installation output:
<code>
Microsoft PnP Utility

Processing inf :            prnhp002.inf
Driver package added successfully.
Published name :            oem16.inf


Total attempted:              1
Number successfully imported: 1
</code>

You can now delete the //drv// folder.

**Step two: add the printer through cmd.exe:**
<code>
rundll32 printui.dll,PrintUIEntry /if /f "%windir%\inf\ntprint.inf" /r "https://tisk2.sin.cvut.cz:631/printers/sin-c13-hp" /m "HP Color LaserJet CP5220 Series PCL6" /b "SIN-IPP" /n "SIN-IPP"  /x 
</code>
If there is any error, it should display on your screen. If not, then in about a minute or two, you should see your new printer, named SIN-IPP. You can change the name later.

If you want to use **duplex printing and A3 paper format**, you will need to modify some settings - follow section [[en:verejne:sit:tiskarna:nastaveni|]].

===== Setup through GUI =====

FIXME The driver installation is much easier with the advanced steps above.

In the Start menu (Windows logo), go to **Settings**.

{{:en:verejne:sit:tiskarna:print-w10-1.png|}}

Head into **Devices** section.

{{:en:verejne:sit:tiskarna:print-w10-2.png|}}

In the left submenu, choose **Printers & Scanners**.
On the right, click the button **+ Add a printer or scanner**.

{{:en:verejne:sit:tiskarna:print-w10-3.png|}}

After clicking, your system will start searching for printers. Wait a few seconds until the **The printer that I want isn't listed** link shows up, then click it.

{{:en:verejne:sit:tiskarna:print-w10-4.png|}}

A dialog window, **Add new printer**, will show up. Here, you shall choose the **Select a shared printer by name** option. Then fill the associated address field with: <code>https://tisk2.sin.cvut.cz:631/printers/sin-c13-hp</code>

Click **Next**.

{{:en:verejne:sit:tiskarna:print-w10-5.png|}}

Now is the connection phase. If you entered the wrong address, or you are not currently connected to the Club Sincoolka network, it will fail and you will have to try again.

{{:en:verejne:sit:tiskarna:print-w10-6.png|}}

After a successful connection, Windows will ask you for a driver. Pick manufacturer **HP** and model **HP Color LaserJet CP5220 Series PCL6**, or **HP Universal Print Driver (PCL6)**.

If you cannot find any of these, please click the **Windows Update** button to try to get additional drivers from the Internet. It will take additional 10-15 minutes and you will not see any progress bar. At the end, the list of drivers should grow bigger.

{{:en:verejne:sit:tiskarna:print-w10-7.png|}}

After a brief moment of installing, you shall see the confirmation screen.

{{:en:verejne:sit:tiskarna:print-w10-8.png|}}

Congratulations, now the printer is installed! If you want to use **duplex printing and A3 paper format**, you will need to modify some settings - follow section [[en:verejne:sit:tiskarna:nastaveni|]].

Printed documents can be collected in the kitchen on the east wing of corridor no. 13 (next to a server room), through the hole in the door between the kitchen and the server room.

{{:en:verejne:sit:tiskarna:dsc37049.jpg}}